Thin Section Bearings Open Angular Contact Ball Bearings, A Type KAA-KG Series

Inch size thin section angular contact ball bearing is the type that widely used in industrial field where the constant section bearing to be used.
This kind of bearing can carry radial load and one-direction thrust load, and is usually used with another bearing with the same structure.
Normally, this bearing should be mounted opposed to another bearing to establish and maintain the contact angle.

Send Inquiry

Angular Contact Thin-Section Ball Bearings Technical Specification:

Structural Design & Operational Principles

The angular contact configuration is a prevalent design in thin-section ball bearings. Characterized by a circular pocket separator, the thin-section angular contact ball bearing is engineered by reducing the shoulder height of either the inner or outer ring raceway on one side of a deep groove ball bearing structure, thereby forming the angular contact geometry. Its snap-lock assembly design enables compatibility with circular pocket separators and accommodates larger-sized, increased-quantity rolling elements.

Load Capacity & Application

This bearing type supports radial loads and unidirectional axial loads, typically requiring pairing with an identical bearing to optimize performance. A-type variants necessitate thrust loading to maintain the designed contact angle (standard: 20°–30°). With rolling element quantity approximately 65% of a full complement, angular contact ball bearings deliver superior axial load capacity compared to radial deep groove ball bearings or four-point contact ball bearings. For bidirectional thrust load handling, these bearings are commonly installed in opposed (face-to-face or back-to-back) configurations. Custom group mounting (e.g., face-to-face [DF], back-to-back [DB], or three-bearing [DT] arrangements) is available upon customer request.

Key Technical Parameters

Category	Details
Bearing Type	Ball Bearing
Load Direction	Angular Contact
Construction	Single Row
Contact Angle	20°–30°
Seal Type	Open
Cross Section	3/16″ × 3/16″ (4.762mm × 4.762mm) to 1″ × 1″ (25.4mm × 25.4mm)
Series Number	NKAA, NKA, NKB, NKC, NKD, NKF, NKG

Material & Manufacturing Specifications

Ring Material: 52100 Chrome Steel (high-carbon chromium alloy steel)
Ball Material: 52100 Chrome Steel
Cage Material: Brass (for optimal load distribution and corrosion resistance)

Performance & Environmental Adaptability

Lubrication: Pre-lubricated (factory-applied grease for initial operation)
Shaft Mount Type: Press Fit (ensures precise radial alignment and torque transmission)
Temperature Range: -20°C to 180°C (suitable for extreme industrial environments)
ABEC Rating: ABEC-1 (meets basic precision standards for general industrial applications)

This specification underscores the bearing’s precision engineering, optimized load distribution, and adaptability to demanding operational conditions, making it ideal for applications requiring compact size, high axial stiffness, and reliable performance.

Thin Section Radial Contact Ball Bearings NKAA Series (3/16″X 3/16″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKAA
Inner Diameters: 1.000 inch (25.4 mm)-1.750 inch (44.45 mm)
Outer Diameters: 1.375 inch (34.925 mm)- 2.125 inch (53.975 mm)
Weight:0.011 kg-0.020 kg

Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKAA10AG0	1.000	1.375	0.188	1510	670	4310	2000	0.011	KYS010	KAA10AG0	CSEAA010-TN
	25.400	34.925	4.762
NKAA15AG0	1.500	1.875	0.188	2130	890	6130	3250	0.017	KYS015	KAA15AG0	CSEAA015-TN
	38.100	47.625	4.762
NKAA17AG0	1.750	2.125	0.188	2220	2060	6760	3600	0.020	KYS017	KAA17AG0	CSEAA017-TN
	44.450	53.975	4.762

Thin Section Radial Contact Ball Bearings NKA Series (1/4″X 1/4″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKA
Inner Diameters: 2.000 inch (25.4 mm)-12.000 inch (44.45 mm)
Outer Diameters: 2.500 inch (63.500 mm)- 12.500 inch (317.500 mm)
Weight:0.045 kg-0.245 kg

◆NKA SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKA020AR0	2.000	2.500	0.250	3510	1470	10140	4270	0.045	KYA020	KA020AR0	CSEA020
	50.800	63.500	6.350
NKA025AR0	2.500	3.000	0.250	4270	1690	12360	4890	0.054	KYA025	KA025AR0	CSEA025
	63.500	76.200	6.350
NKA030AR0	3.000	3.500	0.250	5070	1910	14620	5470	0.064	KYA030	KA030AR0	CSEA030
	76.200	88.900	6.350
NKA035AR0	3.500	4.000	0.250	5830	2090	16850	6000	0.077	KYA035	KA035AR0	CSEA035
	88.900	101.600	6.350
NKA040AR0	4.000	4.500	0.250	6630	2270	19110	6530	0.086	KYA040	KA040AR0	CSEA040
	101.600	114.300	6.350
NKA042AR0	4.250	4.750	0.250	7020	2360	20230	6800	0.091	KYA042	KA042AR0	CSEA042
	107.950	120.650	6.350
NKA045AR0	4.500	5.000	0.250	7380	2450	21380	7020	0.095	KYA045	KA045AR0	CSEA045
	114.300	127.000	6.350
NKA047AR0	4.750	5.250	0.250	7780	2530	22490	7290	0.100	KYA047	KA047AR0	CSEA047
	120.650	133.350	6.350
NKA050AR0	5.000	5.500	0.250	8180	2620	23600	7510	0.104	KYA050	KA050AR0	CSEA050
	127.000	139.700	6.350
NKA055AR0	5.500	6.000	0.250	8980	2760	25870	8000	0.113	KYA055	KA055AR0	CSEA055
	139.700	152.400	6.350
NKA060AR0	6.000	6.500	0.250	9740	2930	28090	8450	0.127	KYA060	KA060AR0	CSEA060
	152.400	165.100	6.350
NKA065AR0	6.500	7.000	0.250	10540	3070	30360	8890	0.136	KYA065	KA065AR0	CSEA065
	165.100	177.800	6.350
NKA070AR0	7.000	7.500	0.250	11290	3250	32630	9340	0.145	KYA070	KA070AR0	CSEA070
	177.800	190.500	6.350
NKA075AR0	7.500	8.000	0.250	12090	3380	34850	9740	0.154	KYA075	KA075AR0	CSEA075
	190.500	203.200	6.350
NKA080AR0	8.000	8.500	0.250	12850	3510	37120	10140	0.163	KYA080	KA080AR0	CSEA080
	203.200	215.900	6.350
NKA090AR0	9.000	9.500	0.250	14400	3780	41610	10980	0.186	KYA090	KA090AR0	CSEA090
	228.600	241.300	6.350
NKA100AR0	10.000	10.500	0.250	15960	4050	46100	11740	0.204	KYA100	KA100AR0	CSEA100
	254.000	266.700	6.350
NKA110AR0	11.000	11.500	0.250	17510	4310	50580	12490	0.227	KYA110	KA110AR0	CSEA110
	279.400	292.100	6.350
NKA120AR0	12.000	12.500	0.250	19070	4580	55070	13200	0.245	KYA120	KA120AR0	CSEA120
	304.800	317.500	6.350

Thin Section Radial Contact Ball Bearings NKB Series (5/16″X 5/16″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKB
Inner Diameters: 2.000 inch (50.800 mm)-20.000 inch (508.000 mm)
Outer Diameters: 2.625 inch (66.675 mm)- 20.625 inch (523.875 mm)
Weight:0.068 kg-0.635 kg

◆NKB SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKB020AR0	2.000	2.625	0.313	4850	2130	14000	6130	0.068	KYB020	KB020AR0	CSEB020
	50.800	66.675	7.938
NKB025AR0	2.500	3.125	0.313	5960	2450	17160	7070	0.086	KYB025	KB025AR0	CSEB025
	63.500	79.375	7.938
NKB030AR0	3.000	3.625	0.313	6890	2710	19870	7780	0.100	KYB030	KB030AR0	CSEB030
	76.200	92.075	7.938
NKB035AR0	3.500	4.125	0.313	7960	2980	23030	8580	0.122	KYB035	KB035AR0	CSEB035
	88.900	104.775	7.938
NKB040AR0	4.000	4.625	0.313	9070	3250	26180	9340	0.136	KYB040	KB040AR0	CSEB040
	101.600	117.475	7.938
NKB042AR0	4.250	4.875	0.313	9560	3330	27560	9650	0.141	KYB042	KB042AR0	CSEB042
	107.950	123.825	7.938
NKB045AR0	4.500	5.125	0.313	10000	3470	28890	9960	0.154	KYB045	KB045AR0	CSEB045
	114.300	130.175	7.938
NKB047AR0	4.750	5.375	0.313	10620	3600	30720	10400	0.159	KYB047	KB047AR0	CSEB047
	120.650	136.525	7.938
NKB050AR0	5.000	5.625	0.313	11110	3690	32050	10710	0.168	KYB050	KB050AR0	CSEB050
	127.000	142.875	7.938
NKB055AR0	5.500	6.125	0.313	12180	3960	35200	11380	0.181	KYB055	KB055AR0	CSEB055
	139.700	155.575	7.938
NKB060AR0	6.000	6.625	0.313	13290	4180	38360	12050	0.200	KYB060	KB060AR0	CSEB060
	152.400	168.275	7.938
NKB065AR0	6.500	7.125	0.313	14220	4360	41070	12620	0.213	KYB065	KB065AR0	CSEB065
	165.100	180.975	7.938
NKB070AR0	7.000	7.625	0.313	15340	4580	44270	13250	0.227	KYB070	KB070AR0	CSEB070
	177.800	193.675	7.938
NKB075AR0	7.500	8.125	0.313	16450	4800	47430	13870	0.245	KYB075	KB075AR0	CSEB075
	190.500	206.375	7.938
NKB080AR0	8.000	8.625	0.313	17510	5020	50580	14490	0.259	KYB080	KB080AR0	CSEB080
	203.200	219.075	7.938
NKB090AR0	9.000	9.625	0.313	19560	5420	56450	15600	0.290	KYB090	KB090AR0	CSEB090
	228.600	244.475	7.938
NKB100AR0	10.000	10.625	0.313	21740	5780	62760	16710	0.322	KYB100	KB100AR0	CSEB100
	254.000	269.875	7.938
NKB110AR0	11.000	11.625	0.313	23780	6130	68630	17780	0.354	KYB110	KB110AR0	CSEB110
	279.400	295.275	7.938
NKB120AR0	12.000	12.625	0.313	25960	6530	74940	18850	0.386	KYB120	KB120AR0	CSEB120
	304.800	320.675	7.938
NKB140AR0	14.000	14.625	0.313	30050	7200	86680	20760	0.445	KYB140	KB140AR0	CSEB140
	355.600	371.475	7.938
NKB160AR0	16.000	16.625	0.313	34270	7870	98900	22670	0.509	KYB160	KB160AR0	CSEB160
	406.400	422.275	7.938
NKB180AR0	18.000	18.625	0.313	38490	8490	111080	24490	0.572	KYB180	KB180AR0	CSEB180
	457.200	473.075	7.938
NKB200AR0	20.000	20.625	0.313	42720	9110	123260	26230	0.635	KYB200	KB200AR0	CSEB200
	508.000	523.875	7.938

Thin Section Radial Contact Ball Bearings NKC Series (3/8″X 3/8″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKC
Inner Diameters: 4.000 inch (50.800 mm)-20.000 inch (508.000 mm)
Outer Diameters: 4.750 inch (66.675 mm)- 20.750 inch (527.050 mm)
Weight:0.200 kg-0.921 kg

◆NKC SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKC040AR0	4.000	4.750	0.375	11340	4270	32720	12310	0.200	KYC040	KC040AR0	CSEC040
	101.600	120.650	9.525
NKC042AR0	4.250	5.000	0.375	12050	4450	34760	12800	0.209	KYC042	KC042AR0	CSEC042
	107.900	127.000	9.525
NKC045AR0	4.500	5.250	0.375	12710	4620	36760	13290	0.222	KYC045	KC045AR0	CSEC045
	114.300	133.350	9.525
NKC047AR0	4.750	5.000	0.375	13420	4760	38760	13780	0.231	KYC047	KC047AR0	CSEC047
	120.650	139.700	9.525
NKC050AR0	5.000	5.750	0.375	14140	4930	40760	14220	0.245	KYC050	KC050AR0	CSEC050
	127.000	146.050	9.525
NKC055AR0	5.500	6.250	0.375	15290	5200	44090	14980	0.263	KYC055	KC055AR0	CSEC055
	139.700	158.750	9.525
NKC060AR0	6.000	6.750	0.375	16670	5510	48100	15910	0.290	KYC060	KC060AR0	CSEC060
	152.400	171.450	9.525
NKC065AR0	6.500	7.250	0.375	18050	5820	52100	16760	0.308	KYC065	KC065AR0	CSEC065
	165.100	184.150	9.525
NKC070AR0	7.000	7.750	0.375	19200	6050	55430	17490	0.336	KYC070	KC070AR0	CSEC070
	177.800	196.850	9.525
NKC075AR0	7.500	8.250	0.375	20580	6360	59470	18310	0.354	KYC075	KC075AR0	CSEC075
	190.500	209.550	9.525
NKC080AR0	8.000	8.750	0.375	22010	6620	63480	19110	0.381	KYC080	KC080AR0	CSEC080
	203.200	222.300	9.525
NKC090AR0	9.000	9.750	0.375	24540	7110	70810	20580	0.445	KYC090	KC090AR0	CSEC090
	228.600	247.650	9.525
NKC100AR0	10.000	10.750	0.375	27290	7650	78810	22090	0.472	KYC100	KC100AR0	CSEC100
	254.000	273.050	9.525
NKC110AR0	11.000	11.750	0.375	29870	8130	86190	23470	0.517	KYC110	KC110AR0	CSEC110
	279.400	298.450	9.525
NKC120AR0	12.000	12.750	0.375	32400	8580	93520	24800	0.558	KYC120	KC120AR0	CSEC120
	304.800	323.850	9.525
NKC140AR0	14.000	14.750	0.375	37740	9510	108900	27430	0.649	KYC140	KC140AR0	CSEC140
	355.600	374.650	9.525
NKC160AR0	16.000	16.750	0.375	43030	10360	124240	29920	0.739	KYC160	KC160AR0	CSEC160
	406.400	425.450	9.525
NKC180AR0	18.000	18.750	0.375	48360	11200	139620	32360	0.830	KYC180	KC180AR0	CSEC180
	457.200	476.250	9.525
NKC200AR0	20.000	20.750	0.375	53470	11960	154330	34580	0.921	KYC200	KC200AR0	CSEC200
	508.000	527.050	9.525

Thin Section Radial Contact Ball Bearings NKD Series (1/2″X 1/2″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKD
Inner Diameters: 4.000 inch (101.600 mm)-5.000 inch (127.000 mm)
Outer Diameters: 20.000 inch (508.000 mm)- 21.000 inch (533.400 mm)
Weight:0.363 kg-1.660 kg

◆NKD SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKD040AR0	4.000	5.000	0.500	15780	6580	45610	18940	0.363	KYD040	KD040AR0	CSED040
	101.600	127.000	12.700
NKD042AR0	4.250	5.250	0.500	16670	6800	48140	19650	0.381	KYD042	KD042AR0	CSED042
	107.950	133.350	12.700
NKD045AR0	4.500	5.500	0.500	17560	7020	50670	20310	0.400	KYD045	KD045AR0	CSED045
	114.300	139.700	12.700
NKD047AR0	4.750	5.750	0.500	18450	7290	53210	20980	0.422	KYD047	KD047AR0	CSED047
	120.650	146.050	12.700
NKD050AR0	5.000	6.000	0.500	19290	7510	55740	21650	0.445	KYD050	KD050AR0	CSED050
	127.000	152.400	12.700
NKD055AR0	5.500	6.500	0.500	21070	7960	60810	22940	0.481	KYD055	KD055AR0	CSED055
	139.700	165.100	12.700
NKD060AR0	6.000	7.000	0.500	22800	8400	65880	24180	0.522	KYD060	KD060AR0	CSED060
	152.400	177.800	12.700
NKD065AR0	6.500	7.500	0.500	24580	8800	70940	25430	0.562	KYD065	KD065AR0	CSED065
	165.100	190.500	12.700
NKD070AR0	7.000	8.000	0.500	26310	9200	76010	26630	0.603	KYD070	KD070AR0	CSED070
	177.800	203.200	12.700
NKD075AR0	7.500	8.500	0.500	28090	9650	81080	27780	0.644	KYD075	KD075AR0	CSED075
	190.500	215.900	12.700
NKD080AR0	8.000	9.000	0.500	29830	10050	86140	28940	0.689	KYD080	KD080AR0	CSED080
	203.200	228.600	12.700
NKD090AR0	9.000	10.000	0.500	33340	10800	96280	31160	0.767	KYD090	KD090AR0	CSED090
	228.600	254.000	12.700
NKD100AR0	10.000	11.000	0.500	36850	11560	106410	33340	0.848	KYD100	KD100AR0	CSED100
	254.000	279.400	12.700
NKD110AR0	11.000	12.000	0.500	40360	12270	116550	35380	0.930	KYD110	KD110AR0	CSED110
	279.400	304.800	12.700
NKD120AR0	12.000	13.000	0.500	43870	12980	126680	37430	1.010	KYD120	KD120AR0	CSED120
	304.800	330.200	12.700
NKD140AR0	14.000	15.000	0.500	50900	14310	146950	41290	1.170	KYD140	KD140AR0	CSED140
	355.600	381.000	12.700
NKD160AR0	16.000	17.000	0.500	57920	15600	167220	45030	1.330	KYD160	KD160AR0	CSED160
	406.400	431.800	12.700
NKD180AR0	18.000	19.000	0.500	64940	16850	187490	48580	1.490	KYD180	KD180AR0	CSED180
	457.200	482.600	12.700
NKD200AR0	20.000	21.000	0.500	71970	18050	207760	52050	1.660	KYD200	KD200AR0	CSED200
	508.000	533.400	12.700

Thin Section Radial Contact Ball Bearings NKF Series (3/4″X 3/4″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKF
Inner Diameters: 4.000 inch (101.600 mm)-5.000 inch (127.000 mm)
Outer Diameters: 20.000 inch (508.000 mm)- 21.500 inch (546.100 mm)
Weight:0.875 kg-4.040 kg

◆NKF SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKF040AR0	4.000	5.500	0.750	28230	12980	81520	37430	0.875	KYF040	KF040AR0	CSEF040
	101.600	139.700	19.050
NKF042AR0	4.250	5.750	0.750	29340	13290	84680	38360	0.930	KYF042	KF042AR0	CSEF042
	107.950	146.050	19.050
NKF045AR0	4.500	6.000	0.750	31520	13960	90950	40230	0.975	KYF045	KF045AR0	CSEF045
	114.300	152.400	19.050
NKF047AR0	4.750	6.250	0.750	32580	14270	94060	41160	1.040	KYF047	KF047AR0	CSEF047
	120.650	158.750	19.050
NKF050AR0	5.000	6.500	0.750	33650	14580	97210	42050	1.090	KYF050	KF050AR0	CSEF050
	127.000	165.100	19.050
NKF055AR0	5.500	7.000	0.750	36940	15510	106590	44720	1.180	KYF055	KF055AR0	CSEF055
	139.700	177.800	19.050
NKF060AR0	6.000	7.500	0.750	40180	16400	116020	47340	1.240	KYF060	KF060AR0	CSEF060
	152.400	190.500	19.050
NKF065AR0	6.500	8.000	0.750	43430	17290	125440	49870	1.350	KYF065	KF065AR0	CSEF065
	165.100	203.200	19.050
NKF070AR0	7.000	8.500	0.750	46720	18140	134820	52320	1.450	KYF070	KF070AR0	CSEF070
	177.800	215.900	19.050
NKF075AR0	7.500	9.000	0.750	48900	18670	141080	53920	1.560	KYF075	KF075AR0	CSEF075
	190.500	228.600	19.050
NKF080AR0	8.000	9.500	0.750	52140	19510	150510	56320	1.660	KYF080	KF080AR0	CSEF080
	203.200	241.300	19.050
NKF090AR0	9.000	10.500	0.750	58630	21110	169310	60900	1.810	KYF090	KF090AR0	CSEF090
	228.600	266.700	19.050
NKF100AR0	10.000	11.500	0.750	64100	22360	185000	64590	2.020	KYF100	KF100AR0	CSEF100
	254.000	292.100	19.050
NKF110AR0	11.000	12.500	0.750	70590	23870	203800	68900	2.180	KYF110	KF110AR0	CSEF110
	279.400	317.500	19.050
NKF120AR0	12.000	13.500	0.750	76010	25070	219490	72410	2.380	KYF120	KF120AR0	CSEF120
	304.800	342.900	19.050
NKF140AR0	14.000	15.500	0.750	87970	27650	253990	79790	2.720	KYF140	KF140AR0	CSEF140
	355.600	393.700	19.050
NKF160AR0	16.000	17.500	0.750	99920	30100	288440	86860	3.220	KYF160	KF160AR0	CSEF160
	406.400	444.500	19.050
NKF180AR0	18.000	19.500	0.750	112950	32670	326090	94280	3.580	KYF180	KF180AR0	CSEF180
	457.200	495.300	19.050
NKF200AR0	20.000	21.500	0.750	124910	34940	360580	100810	4.040	KYF200	KF200AR0	CSEF200
	508.000	546.100	19.050

Thin Section Radial Contact Ball Bearings NKG Series (1″X 1″)

A-TYPE–Thin Section Bearings

Contact Angle: 20°- 30°
Seals Type: Open
Series: NKG
Inner Diameters: 4.000 inch (101.600 mm)-20.000 inch (508.000 mm)
Outer Diameters: 6.000 inch (152.4 mm)- 22.000 inch (558.800 mm)
Weight:1.640 kg-6.890 kg

◆NKG SERIES
Part No	Dimension（inch/mm)			Basic Cap（N)				Weight	Interchange
	d	D	H	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	INA
NKG040AR0	4.000	6.000	1.000	42140	20980	121620	60590	1.640	KYG040	KG040AR0	CSEG040
	101.600	152.400	25.400
NKG042AR0	4.250	6.250	1.000	44230	21690	227710	62630	1.740	KYG042	KG042AR0	CSEG042
	107.950	158.750	25.400
NKG045AR0	4.500	6.500	1.000	46360	22360	133800	64590	1.790	KYG045	KG045AR0	CSEG045
	114.300	165.100	25.400
NKG047AR0	4.750	6.750	1.000	48450	23030	139840	66540	1.890	KYG047	KG047AR0	CSEG047
	120.650	171.450	25.400
NKG050AR0	5.000	7.000	1.000	50540	23690	145930	68450	2.000	KYG050	KG050AR0	CSEG050
	127.000	177.800	25.400
NKG055AR0	5.500	7.500	1.000	54760	25030	158110	72190	2.150	KYG055	KG055AR0	CSEG055
	139.700	190.500	25.400
NKG060AR0	6.000	8.000	1.000	58990	26270	170240	75830	2.300	KYG060	KG060AR0	CSEG060
	152.400	203.200	25.400
NKG065AR0	6.500	8.500	1.000	63210	27520	182420	79430	2.450	KYG065	KG065AR0	CSEG065
	165.100	215.900	25.400
NKG070AR0	7.000	9.000	1.000	67390	28720	194600	82900	2.660	KYG070	KG070AR0	CSEG070
	177.800	228.600	25.400
NKG075AR0	7.500	9.500	1.000	71610	29920	206740	86320	2.810	KYG075	KG075AR0	CSEG075
	190.500	241.300	25.400
NKG080AR0	8.000	10.000	1.000	75830	31070	218920	89700	2.970	KYG080	KG080AR0	CSEG080
	203.200	254.000	25.400
NKG090AR0	9.000	11.000	1.000	84280	33340	243230	96190	3.270	KYG090	KG090AR0	CSEG090
	228.600	279.400	25.400
NKG100AR0	10.000	12.000	1.000	92680	35520	267550	102500	3.630	KYG100	KG100AR0	CSEG100
	254.000	304.800	25.400
NKG110AR0	11.000	13.000	1.000	101120	37650	291860	108640	3.940	KYG110	KG110AR0	CSEG110
	279.400	330.200	25.400
NKG120AR0	12.000	14.000	1.000	109530	39690	316220	114590	4.300	KYG120	KG120AR0	CSEG120
	304.800	355.600	25.400
NKG140AR0	14.000	16.000	1.000	126370	43650	364850	126060	4.940	KYG140	KG140AR0	CSEG140
	355.600	406.400	25.400
NKG160AR0	16.000	18.000	1.000	143220	47470	413470	137040	5.620	KYG160	KG160AR0	CSEG160
	406.400	457.200	25.400
NKG180AR0	18.000	20.000	1.000	160110	51120	462280	147570	6.260	KYG180	KG180AR0	CSEG180
	457.200	508.000	25.400
NKG200AR0	20.000	22.000	1.000	176960	54670	510730	157750	6.890	KYG200	KG200AR0	CSEG200
	508.000	558.800	25.400